page-b

Isigaba esithathu se-LCD singeniswe edijithali sibonisa imisebenzi eyimitha yamandla e-elektroniki nge-rs485

Isixhobo esinezinto ezininzi ezisebenza ngaphakathi kwisigaba esithathu, uhlobo lwesixhobo sombane esinobuqili kunye nomgangatho wokuhlelwa, isibonisi, unxibelelwano lwe-RS485 yedijithali kunye nokuphuma kwamandla ombane, onako ukulinganisa ivolthi, amandla akhoyo ngoku, amandla asebenzayo, amandla ombane, imvamisa, umlinganiselo wamandla , ukuboniswa kwedatha, ukuqokelelwa nokudluliselwa, kungasetyenziswa ngokubanzi ekufakweni kwe-automation, ukuhambisa i-automation, izakhiwo ezinengqiqo, kunye nomlinganiselo wamandla, ulawulo, kunye novavanyo ngaphakathi kwishishini. Ukuchaneka komgangatho kwinqanaba 1, ukuqonda i-LCD okanye ukuboniswa kwe-LED kwisayithi kunye nonxibelelwano olukude lwe-RS485. Iyahambelana ne-protocol ye-DL / T645-2007 kunye ne-protocol yonxibelelwano ye-MODBUS-RTU.


Iinkcukacha zeMveliso

Iimpawu zeemveliso

——Umsebenzi weMveliso——

 

1.Flame retardant, kulula ukuyifaka

I-2.Light backlight, i-LCD enkulu, umboniso ocacileyo

I-3.Can bonisa i-voltage yamanqanaba amathathu, yangoku, amandla asebenzayo / asebenzayo, amandla ombane kunye nobuninzi bokujika kwisikrini esikhulu

Umsebenzi wokunxibelelana, unokusebenzisa iziteshi ezi-2 ukuhambisa idatha ngaxeshanye.

5.Usebenza ngokuhleleleka, umyinge wokuguqula unokubekelwa umda.

6.Umatshini wendlela: Iicingo ezintathu zesigaba sesithathu, isigaba sesithathu seengcingo ezine, njl.

Imigangatho ye-7.voltage: 380V / 100V / 57.7V kunye nezinye, ziyahambelana ngokupheleleyo.

Iqhosha le-8.Silicone, imvakalelo yokuchukumisa elungileyo kunye nexesha elide elifanelekileyo

9.Iklip yokufaka ayikho lula ukwaphula, iqinile

——Iiparamitha zobugcisa——

 

Umbane wevolumu I-220V / 600V
Ukucaciswa okwangoku 5A
Rated frequency I-50Hz
Inqanaba lokuchaneka Inqanaba 1 elisebenzayo
Ukutya umbane ≦ I-5VA
Ukujongana kwidijithali Umgca we-2 RS485, MODBUS-RTU (DL645-2007)
Imveliso yokuPhumela Umgca woku-1
Uluhlu lobushushu Uluhlu lobushushu bokusebenza -10 ~ 55 degree,
Uluhlu lokushisa lobushushu -20 ~ 75 degree

 

——Imifanekiso yemveliso——

 

embedded (1)  embedded (2)  embedded (3)

 

Isiphelomm

 

Ubungakanani bangaphandlemm

Ubungakanani beHolemm

Umda omncinci wokufakwamm

Umda omncinci wokufakwamm

Ubunzulu (mm

I-97 * 97

91 * 91

97

97

80

 

image4

 

——Iindlela zoNxibelelwano zoMbane——

 

1.Lungisa imitha yombane kwibhokisi yemitha, kwaye uqhagamshele ujongano. Kucetyiswa ukuba usebenzise ucingo lobhedu okanye i-terminal yobhedu.

Igalelo lokufakaVoltage: Umthamo wegalelo akufuneki ube ngaphezulu kunevolthi yemveliso efakiweyo ye-220V, kungenjalo i-PT kufuneka ithathelwe ingqalelo.

3.Ugalelo olufanayo: Okona kufakwe kwimilinganiselo okhoyo ngoku yi-5A. Ngaphezulu kwe-5A, i-CT external yenguqu yangokukufuneka isetyenziswe. Ukuba ezinye izixhobo ziqhagamshelwe kwi-CT esetyenzisiweyo, i-wiring kufuneka ibe kumanqaku. Ngaphambi kokususa ucingo lwangoku lokufaka, qiniseka ukuba unqumle isekethe yokuqala ye-CT okanye umfutshane kwisekethe yesibini.

Qinisekisa ukuba ivolumu yokufaka kunye neyangoku iyahambelana kwenye ngokulandelelana, kunye neendlela ezingenayo neziphumayo ziyafana; ngaphandle koko, amaxabiso kunye neesimboli ziya kuba ziphosakele!


  • Edlulileyo:
  • Okulandelayo:

  • Bhala umyalezo wakho apha kwaye usithumele kuthi